 Home Page |
|
 Contact us |
 |
$149 (B) ( BULK BUY ) 
$99 (30) |
|
|
Video System: PAL fully compatible
with Australian TV System.
Image Device: 512 (H) x 582 (V) 297
984 Pixel ¼" LOW
BLEMISH Sharp Interline Transfer CCD.
Colour
Day / Night Infrared Light Emitting Diode
Night Vision Camera 'Primer'
here.
Lens: Board Type 4.3 mm Focal Length, there are
no Accessory Lenses for this Camera,
additional information
here.
Scanning System: 2 : 1 Interlace PAL
50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p Composite
Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket ~ 1.8
metre cable.
Horizontal Resolution: ~ 400 pixels
(this value is provided for comparative purposes only) Better than VHS * NEAR
Super-VHS resolution.
Minimum Illumination: ~ 5 lux @ F1.2
(this value is provided for comparative purposes only), 0 lux with the inbuilt
LEDs 'ON', ~ 90% of the Width-of-Vision is illuminated at 3 ~ 6 metres depending
on the Infra-Red reflective characteristics of objects.
Light Emitting Diodes: Twelve ~ 845 nm
wavelength Infrared, produce a visible dull Red glow. Automatic Light Sensor
switches LEDs On/Off depending on light level.
Automatic Electronic Shutter (AES):
1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds, additional
information
here.
Automatic Gain Control: Yes.
Spectral Response:
~ 400 to ~ 1000 nm with an Infrared 'CUT' Notch
between approximately 720 ~ 830 nm, additional information
here.
Signal to Noise ratio: up to 48 dB,
measured with AGC off.
Power Requirements: 12 Volts DC
Regulated, ~ 110 milliamps LEDs Off, ~ 150 mA LEDs On, 2.1 x 5.5 mm DC socket,
center pin = (+),
~ 1.8 metre cable.
Dimensions: ~ 52 mm Diameter, ~ 82 mm
Long excluding cable Union - excluding removable Hood, ~ 400 grams
including Hood.
Manufacturer's Experience: 10 + Years,
ISO 9001 Certified.
Need Sound ? click
here
Ancillary Products
Power-Up-Cable |
|||
Use your Browser "Back
Button" to return to previous page