Covert Spy
Hidden Pinhole Colour
CCTV Video Surveillance Camera in PIR Movement Detector with Relay to switch
Lamps, Alarms, VCRs, etc. Use with our VCR-CONT and a standard VCR for
'Event-Only' recording and eliminate tedious searching of video tapes. Connect
to 12 VDC, Composite Video AV input on TVs, VCRs, etc. 1/4 inch CCD Video Camera
Image Sensor with Digital Signal Processing, suitable for normal light levels in
Homes, Offices, Showrooms, etc. Ideal for discreet or covert surveillance
Pinhole Lens is concealed and unit is unobtrusive with the appearance of a
common movement detector. For: general CCTV Video Surveillance Observation and
particularly for covert or discreet Closed Circuit Television surveillance and
stand-alone detection and event-only recording. Use with our CCTV - TV / VCR
Interface Module and connect to TV antenna system for viewing / recording on all
TVs and VCRs.
Cat Code:
PIRD-C
1/4" CCD Image Sensor * CONCEALED
PINHOLE Colour PCB
MODULE in PIR MOVEMENT DETECTOR + RELAY.
Includes 5.5 mm Pinhole Lens & Swivel
Mounting Bracket
¼"
LOW BLEMISH COLOUR
CCD Image Sensor PCB Camera Module
with 5.5 mm Pinhole Lens in Pyroelectric Passive Infrared Movement Detector with
SPDT Relay * Digital Signal Processing CCTV Video Surveillance
Camera suitable for normal light levels in Homes, Shops, Showrooms, Offices,
Warehouses, etc * DIY Plug-In installation when purchased with Plug Pack and
Cable/Adaptor Set.
Video Output: 1 v p-p Composite Video 75 ohms, suit
Australian TV, VCR, AV & Video inputs via BNC socket on ~ 30 cm cable.
Horizontal Resolution: ~ 440
lines. Better than VHS * Near Super-VHS resolution.
Minimum Illumination: ~ 2 lux @ F1.2.
Spectral Sensitivity: ~ 400 to ~ 700 nm - with
standard Lens.
Automatic Electronic Shutter (AES): 1/50 to 1/100 000
second, 20 milliseconds to 10 microseconds.
Automatic Gain Control: ~ 18 dB.
Signal to Noise ratio: ~ 46 dB.
PIR Range: ~ 7 metres, 110° horizontal angle of view.
PIR Detector Output: SPDT Relay for Alarm, VCR, etc.
Common, Normally-Open, Normally-Closed contacts.
Power Requirements: 12 Volts DC Regulated, ~ 95
milliamps via 2.1 x 5.5 mm DC socket on ~ 30 cm cable.
Dimensions: ~ 60 mm Wide, ~ 115 mm High, ~ 31 mm Deep
excluding swivel bracket, ~ 100 mm including bracket.
Tilt and Pan range ~ ± 25°.
Made in: Taiwan.
Manufacturer's Experience:
8 + Years, ISO 9001 Certified.
Accessories:
Plug-In DIY AV 20 metre Cable / Adaptor Set: 20
metre AV Cable with moulded Plugs & Socket. Two RCA Plugs & DC Plug for Camera
end. Two RCA Plugs for input device, DC Socket for Plug-Pack. Two BNC-RCA
Adaptors for Camera, VCR, Quad, Switcher, Multiplexer, Monitor, Transmitter,
etc.
