| Video System:
PAL fully compatible with Australian TV System.
Image
Device: 752 (H) x 582 (V) 437 664 Pixel 1/3" Sony CCD
image Sensor.

Lens: Board Type
3.6 mm Focal Length, accessory Lenses:
2.1, 2.9, 5.7, 8, 12, 16 & 25
mm (BL)
types on this
page, corners of
image may be slightly cropped with 2.1 mm Lens,
additional information
here.
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket, ~ 20 cm cable.
Horizontal Pixels: 700
better than Super-VHS near DVD resolution (this value is
provided for comparative purposes only).
Sensitivity: ~ 0.5 lux @
F1.2 (this value is provided for comparative purposes only).
Automatic Electronic Shutter
(AES): 1/50 to 1/100 000 second, 20 milliseconds to 10
microseconds, additional information
here.
Signal to Noise ratio: 48 +
dB, measured with AGC Off.
Automatic Gain Control (AGC):
Yes.
Back Light Compensation (BLC):
Automatic.
Spectral Response:
~ 400 to ~ 1000 nm with an
Infrared 'CUT' Notch between approximately 720 ~ 830 nm,
Colour
Day / Night Infrared
Infrared Night Vision information
'Primer'
here.
See-in-the-Dark with
an
IR Illuminator.
Power Requirements: 12 Volts
DC Regulated, ~ 80 milliamps, 2.1 x 5.5 mm DC socket, center
pin = (+),
~ 20 cm cable.
Dimensions (mm): ~ 32
x 32 ~ 28 deep with 3.6 mm Lens, ~ 10 grams.
Mounting: ~ 28 mm centers, ~ 2 mm diameter
holes.
Mounting Hardware Screw/Nut/Spacer/Bush Paks |