CCTV Quad Screen Processor: Suitable for all CCTV Video Surveillance Cameras in
this catalogue. Connect Four Video Cameras (or other Video Sources) to Digital
Quad Processor which performs an Analog to Digital conversion on signals from
each input then digitally constructs a Quad Screen image that is output as a
standard 75 ohm 1 v p-p Composite Video signal. VCR Output is always Quad
Screen. Monitor Output for live viewing may be a Quad Screen Image, Automatic
Sequentially Switching Images or any Manually Selected input channel. Alarm
inputs, Recover input and Alarm output may be used to control a VCR for
'Event-Only' recording or for Full-Screen On-Alarm recording (using the Monitor
Output) and/or for multiple Remote Monitoring Consoles that allow Manual
Selection of any channel or Quad Screen Image during live viewing. Audible Video
Loss and Alarm buzzers alert user to intrusion and/or interference with Camera
video or power supply wiring. Log record of Alarm and Video Loss events. Alarm
period is programmable and may be used to control VCR recording period. RS232
interface for remote control using a PC.
QUAD-BW 568
4 CAMERA * REAL
TIME QUAD * High 1024 H-Resolution * Time/Date/Title
* 10 Event Alarm Log * Video Loss Detection * Alarm I/O * Security Lock * RS-232
Remote Interface
$ ? (Gold)
click here for details
$463 (A)
$514 (B)
GoVideo
Plug Pack & WARRANTY EXTENSION to 2 YEARS + $20 2 YEAR WARRANTY when purchased & used with GoVideo
Plug Pack
Output to Monitor: Quad Screen, Full Screen or
Sequentially Switching.
Output to VCR: always Quad Screen.
Playback: Quad Screen or Freeze Screen.
REAL TIME
DIGITAL QUAD PROCESSOR
1024 x 512 pixels * BETTER THAN SUPER-VHS QUALITY *
TITLE / TIME / DATE / FREEZE / ALARM - VIDEO LOSS LOG
50 fields/second sampling and display, 8 bit A/D, 256 level Grey Scale.
Video Loss Detection with Audible Alarm and Time/Date Log Entry.
4 Channel Switcher Mode 1 - 99 second Adjustable Dwell. Full Screen Call on Alarm. Four CCIR Composite Video
Camera Inputs each with Gain Control. Four CCIR 75 ohm Composite Video
Looping Outputs.
Quad Screen CCIR 75 ohm Composite Video VCR Output.
Sequential, Quad or Camera 1, 2, 3, 4 Composite Video
Monitor Output.
4 Normally Open Adjustable Sensitivity Alarm Inputs
and 1 NO Recover Input.
NO Alarm Output 1-999 sec Adjustable.
On Screen Set-Up Menu. 10 Record Alarm Log.
Security Lock.
Variable Cross Line Colour or Deletion.
BNC Video I/O, Alarm I/O 9 pin D-Sub Type, 2.1 mm × 5.5 mm DC Input socket.
Power Requirements 12 Volts DC, ~ 6 Watts.
343 mm (W) 66 mm (H) 250 mm (D), 2.5 kg.
Use a
low-cost domestic VCR and our 'VCR Controller' for 'Event-Only' recording, 12 ~
15 Hours Real-Time click here for
details.
Made in: Taiwan
Manufacturer's
Experience: 18 + YEARS in Electronics * 10 + YEARS with QUADS
Plug-In
DIY AV 20 metre Cable / Adaptor Set: 20 metre AV Cable with moulded
Plugs & Socket. Two RCA Plugs & DC Plug for Camera end. Two RCA Plugs
for input device, DC Socket for Plug-Pack. Two BNC-RCA Adaptors for Camera, VCR,
Quad, Switcher, Multiplexer, Monitor, Transmitter, etc.
with 1.5m Cable: + $10
Dual 1.5 m Cable with two RCA Plugs each end, supplied with two BNC-RCA Adaptors
for interconnecting: Quad / Multiplexer / Monitor / VCR etc.
2 YEAR WARRANTY when purchased & used with GoVideo
Plug Pack
