CCTV Quad Screen Processor: Suitable for all CCTV Video Surveillance Cameras in
this catalogue. Connect Four Video Cameras (or other Video Sources) to Digital
Quad Processor which performs an Analog to Digital conversion on signals from
each input then digitally constructs a Quad Screen image that is output as a
standard 75 ohm 1 v p-p Composite Video signal. VCR Output is always Quad
Screen. Monitor Output for live viewing may be a Quad Screen Image, Automatic
Sequentially Switching Images or any Manually Selected input channel. Alarm
inputs and output may be used to control a VCR for 'Event-Only' recording and/or
for multiple Remote Monitoring Consoles that allow Manual Selection of any
channel or Quad Screen Image during live viewing. Alarm period is programmable
up to 256 seconds and may be used to control VCR recording.
Cat Code: QUAD-BW
620
4 Camera * Real Time
Quad * High 1024 Horizontal Resolution * Time
* Date * Camera Title
* Alarm I/O * Remote Camera Selection * FULL-SCREEN-CALL
On-Alarm
$ ? (Gold)
click here
for details
$309 (A)
$349 (B)
Miscellaneous Surplus (Bulky)
Plug-Pack to suit + $2
Output to Monitor: Quad Screen, Full Screen or
Sequentially Switching.
Output to VCR: always Quad Screen.
REAL TIME
DIGITAL QUAD PROCESSOR
BETTER THAN SUPER-VHS 1024 pixel Horizontal
Resolution
TITLE / TIME / DATE / FREEZE / ALARM I/O / REMOTE SELECT
50 fields/second sampling and display, 8 bit A/D, 256 level Grey Scale.
5 Channel Switcher Mode 1 ~ 256 second Adjustable Dwell.
Video Loss Detection with Audible Alarm Full Screen Call on Alarm, Monitor Output switches from
Quad to Full Screen Display of Channel(s) In-Alarm. Four CCIR / EIA (switch select) 75 ohm
Composite Video Camera Inputs each with Gain
Control.
Quad Screen 75 ohm Composite Video VCR Output.
Quad Screen, Camera # 1, 2, 3 ,4 manual select or Automatic Sequential 1,2,3,4,Q
switching Composite Video Monitor Output.
4 Normally Open Alarm Inputs.
Remote Selection of Cameras is possible using Alarm
Inputs.
SPDT Alarm Output 1 ~ 256 seconds
adjustable.
On Screen Set-Up Menu.
BNC Video I/O.
Mains Adaptor Output 18 Volts DC, 0.8 Amp.
~ 250 mm (W) ~ 45 mm (H) ~ 210 mm (D), ~ 1.5 kg.
Use a
low-cost domestic VCR and our 'VCR Controller' for 'Event-Only' recording, 12 ~
15 Hours Real-Time click here
for details.
Made in: Taiwan
Manufacturer's
Experience: 15 + YEARS
Plug-In
DIY AV 20 metre Cable / Adaptor Set: 20 metre AV Cable with moulded
Plugs & Socket. Two RCA Plugs & DC Plug for Camera end. Two RCA Plugs
for input device, DC Socket for Plug-Pack. Two BNC-RCA Adaptors for Camera, VCR,
Quad, Switcher, Multiplexer, Monitor, Transmitter, etc.
