|
|

Cat Code:
RX-TFT-56 $349
|
|
 |
Wireless 2.4 GHz 4 Channel
Video & Audio Receiver / Switcher
AND
Audio Video 5" LCD TFT Colour
Monitor.
Manual or Automatic Sequential
Switching.
12 Volts DC or Mains powered
using
REG12/1.5A or
Universal Power Supply.
Cat Code:
Cable-AV/Rf
AV Input Cable RCA female (Net) $8
Cat Code:
Cable-RCA2 AV
Cable $6
Cat Code: RX-TFT-56SMA
$449 - Special model fitted with SMA antenna input for use with High-Gain
Antennas to extend range.
|
Business
Observe showrooms, warehouse, offices, doors, etc without the need to install
expensive and inflexible wiring.
Receive images to multiple remote Monitors for general surveillance and
observation.
Use in multiple Advertising Displays to display message from a Video Player, PC,
etc.
Entertainment
View & Listen all over the house and even out on the patio or pool area from a
central source.
Safety
See who is outside your door using a Video Camera and Transmitter.
Monitor your baby, your children, the swimming pool, the elderly, ill or
recuperating using your Camcorder or a CCTV Video Camera & Transmitter.
Observe your home or office using up to four transmitters and cameras (in
Australia maximum is two transmitters).
Features:
Display: Colour 5 Inch.
TV System: CCIR / PAL (Australia/UK).
Four Channel Receiver, single channel selection or Automatic Sequential
Switching with ~ 4 second dwell.

Audio & Video Input/Output for: DVD Player, Satellite TV, Reversing Video
Camera, Tuner, Camcorder, Surveillance Video Camera, PC DVD / MPEG / AVI
Playback, TV Set (AV), Switcher, Video Monitor, PC Audio/Video Capture Card,
VCR, DVR, etc.
Receiver Specifications:
ISM Band: 2.4 ~ 2.483 GHz, 4 channels.
Antenna: Whip, non removable folding type.
** RX-TFT-56SMA ONLY has SMA antenna input
socket to extend range with High-Gain antennas listed below.
Demodulation Method: FM.
Oscillator: P.L.L. (Phase Locked Loop).
Sensitivity: -92 dbm.
Display Specifications:
Colour ~ 5 inch / ~ 130 mm (diagonal) Thin Film Transistor (TFT) Liquid Crystal
Display (LCD).
Picture Elements (Pixels): 600 (H) x 234 (V).
Active Area: ~ 113 mm x ~ 75 mm.
Sensitivity (Video): 1.0 v p-p, negative sync.
Inputs:
Composite Video standard 75 ohm and Line Level Audio, via 3.5 mm 3 contact phono
socket on Right side, compatible with CCIR / PAL (Australia/UK) TV System.
** RX-TFT-56SMA ONLY - is fitted
with SMA female antenna input socket, attached Whip Antenna is not connected.
Outputs:
Composite Video standard 75 ohm and Line Level Audio, via 3.5 mm 3 contact phono
socket on Right side.
Speaker, mini internal.
Controls:
Rotary type on Right Side.
Brightness.
Volume.
Press Buttons:
Front Panel.
Power On/Off / AV Input selector.
Channel Select 1, 2, 3 & 4, Auto Sequential Switching On/Off.
Switches:
DIP type on Right Side.
Channel Select 1, 2, 3, & 4 for Auto Scan function.
Auto Scan Dwell Duration 2, 4, 8 or 12 seconds.
Indicators:
Front Panel.
Channel 1, 2, 3 & 4.
Power / AV Input.
Power Requirements:
12 Volts DC Regulated, ~ 950 milliamps, 2.1 x 5.5 mm DC socket, Center Pin = (+)
located on Left Side. ***
12 Volt DC
Regulated 1.5 Amp Power Supply recommended.
Dimensions:
~ 155 mm (W) ~ 116 mm (H) ~ 45 mm (D).
Weight ~ 450 grams.
Mounting:
As pictured on a flat horizontal surface with the rear mounted folding support
'Leg'.
Alternatively via 1/4" UNC threaded mounting point at bottom center of Case.
To View
Detailed Product Information
this
is a PDF document and may take several minutes to download, it will open in a
New Window so you may continue browsing.
Manufacturer's
Experience: 10 + Years ISO 9001 Certified, made in Taiwan.
Compatibility:
Receives transmissions
from: TX-MOD 2, TX-MOD 3, TX-ELECTRET, TX-BNC, TX-AV050, TX-AV500, TX-AV1000,
TX-AV2000, TX-CAM2, TX-CAM2P & TX-CAM3.
Receives transmissions of
Video & Left Audio Channel from TX-Box, TX-Mini & TX/RX AV System II.
ANTENNAS
suitable for Cat Code: RX-TFT-56SMA Only !
Range and Signal to Noise
Ratio (SNR) may be improved by increasing gain of antenna on Receiver and/or
Transmitter. For maximum signal transfer TX and RX antennas should be the same
polarity, that is both oriented Vertically or Horizontally.
 |
Cat Code:
Ant-Stub
$5
0 dBi gain, ~
50 ohms impedance.
Length: ~ 52
mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.
SMA male
Connector.
|
 |
Cat Code:
Ant-Whip $15
~ 3 dBi gain, ~ 50 ohms
impedance.
Length: ~ 145 mm straight
~124 mm folded. Diameter: ~ 9 & 10 mm. Weight: ~ 16 grams.
SMA male Connector.
|
 |
Cat Code:
Ant-W5dB
$20
~ 5 dBi gain, ~ 50
ohms impedance.
Length: ~ 195 mm straight
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top. Weight:
~ 30 grams.
SMA male Connector.
|
 |
Cat Code:
Ant-W9dB
$99
~ 9 dBi gain, ~ 50 ohms
impedance.
Length: ~ 610 mm ~ 825
mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main
center section ~ 24 mm top cap. Weight: ~ 470 grams ~ 730 grams with
Mounting Tube & Clamps/Brackets.
Supplied with Base Mount Tube and
Clamps/Brackets for surface or Tubular Mast mounting. N female
Connector. <Adaptors
& Extension Cables>
|
 |
Cat Code:
Ant-W12dB $129
~ 12 dBi gain, ~ 50 ohms
impedance.
Length: ~ 1210 mm ~ 1425 mm
with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center
section ~ 24 mm top cap. Weight: ~ 670 grams ~ 930 grams with Mounting
Tube & Clamps/Brackets.
Supplied with Base Mount
Tube and Clamps/Brackets for surface or Tubular Mast mounting. N
female Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code:
Ant-Y8
$69
Yagi ~ 8 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-142 Coax cable. Dimensions
(excluding Clamps) ~ 290 x 95 x 35 mm, ~ 530 grams.
Cat Code:
Ant-Y12 $89
Discontinued
Yagi ~ 12 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 430 x 95 x
35 mm, ~ 600 grams.
Cat Code:
Ant-Y15 $99
Yagi ~ 15 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x
35 mm, ~ 680 grams.
Common
Specifications: 2.4 ~ 2.5 GHz Dipole. Supplied with ~ 140 x 70 mm
Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-Y8C
$89
Compact Yagi
2.4 ~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohms impedance. Beamwidth: E70, H90.
Dimensions
(excluding Clamps) ~ 190 mm, ~ 75 mm diameter, ~ 500 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|

 |
Cat Code:
Ant-Y10C
$99
COMPACT Yagi
2.4 ~ 2.5 GHz, ~ 10 dBi gain, ~ 50 ohms impedance. Beamwidth: E44,
H56.
Dimensions
(excluding Clamps) ~ 280 mm, ~ 75 mm diameter, ~ 500 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector.
|
 |
Cat Code:
Ant-Y12C
$109
Yagi 2.4 ~ 2.5
GHz, ~ 12 dBi gain, ~ 50 ohms impedance. Beamwidth: E35, H40.
Dimensions
(excluding Clamps) ~ 450 mm, ~ 75 mm diameter, ~ 650 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|

 |
Cat Code:
Ant-Y16C
$119
Yagi 2.4 ~ 2.5
GHz, ~ 16 dBi gain, ~ 50 ohms impedance. Beamwidth: E28, H28.
Dimensions
(excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|

 |
Cat Code:
Ant-Y17.5C
$149
Yagi Antenna
2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance. Beamwidth: E23,
H24.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~ 500 mm
RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-F16
$129
COMPACT Flat
2.3 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~
27º (H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling mounting &
two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm (D), ~ 740
grams.
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code: Ant-F18
$149
COMPACT Flat 2.3 ~ 2.5 GHz,
~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º (H) ~ 75º (V).
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting & two Tubular
Mast Clamps.
Dimensions (excludes Socket
& Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams.
Pictured in Vertical
Polarity orientation.
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-P10
$89
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 30º (H) ~ 60º (V).
Supplied with
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 275 (W)
~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Pictured in
Vertical Polarity orientation.
SMA
female Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code:
Ant-P18G $119
Sectional Grid Parabolic,
2.4 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance Dipole. Beamwidth ~
25º in vertical polarity mode, Front to Back ratio ~ 20 dB. Fitted
with ~ 750 mm RG-8/U Coax cable.
Reflector ~ 390 x ~ 545 mm.
Weight ~ 1.7 kilograms. Supplied with Hor/Vert Clamp mounting
hardware.
Carriage in an Air Satchel
$24, via Post $35.
Pictured in Vertical
Polarity orientation * Mast not included. Gold Irridite coated version
pictured, we now stock a more durable Galvanised version only.
N male Connector.
<Adaptors & Extension Cables>
|
ADAPTORS
 |
Cat Code: SMAm-Nf
$10
SMA male to N female. Suitable for P18G antenna. |
 |
Cat Code: SMAm-Nm
$10
SMA male to N male. Suitable
for F8N, W9dB, F12, W12dB, F16 & F18 antennas.
|
 |
Cat Code: SMAm-m
$10
SMA male to SMA male.
Suitable for P10 antenna.
|
 |
Cat Code:
Cable-178/30 $19
30 cm RG-178
Coax cable with SMA male & female connectors.
|
 |
Cat Code:
Cable-23/450 $59
~ 450 cm Coax Cable with SMA
male & female connectors. Attenuation ~ 0.75 dB/metre @ 2
GHz.
Cat Code:
Cable-23/450N $59
not pictured
~ 450 cm Coax Cable
with SMA & N male connectors. Attenuation ~ 0.75
dB/metre @ 2 GHz. Suitable for F8N, W9dB, F12, W12dB,
F16 & F18 antennas.
|
|
|
Parabolic Yagi &
Flat are directional antennas. Whip antennas when used vertically
are for most practical purposes omni or non directional.
To maximise 'Range'
minimise the length of Coax Cable between Antenna and TX/RX.
|
|
Antenna Gain...
what does it mean ??? a simplified explanation
Received signal
strength from an antenna with 3 dBi gain will be double that from an antenna
that has 0 dBi gain, received signal strength from a 6 dBi will be double
that from a 3 dBi and so on... An increase in antenna gain of 3 dBi is
approximately equal to doubling the transmitter output, received signal
strength or range can be increased by raising antenna gain or transmitter
output. Range can be doubled by either increasing antenna gain by 6 dBi or
quadrupling the transmitter output.
The maximum allowed
2.4 GHz LIPD Video Transmitter output power is 10 milliwatts (mW) EIRP (in
Australia), increasing transmitter output is illegal and therefore not an
option.
Increasing the gain
of the receiver antenna is an alternative to increasing transmitter output.
In very simple terms: increasing antenna gain from 0 dBi to 3
dBi is equivalent to raising the output power of a 10 mW transmitter to ~ 20
mW. (5 dBi to ~ 33 mW) ( 8 dBi to ~ 66 mW) (12 dBi to ~ 160 mW) (15 dBi to ~
320 mW) (18 dBi to ~ 640 mW)
|
|
* LIPD = Low
Interference Potential Devices. * EIRP = Equivalent Isotropically Radiated
Power. Source: Australian Communications Authority
Click below for information on Frequencies & Power Limits
http://www.aca.gov.au
|
Portable LCD TFT
Colour Video Monitor 12 VDC or Mains powered with inbuilt Wireless 4 Channel 2.4
GHz AV Receiver & Sequential Switcher & External Audio/Video I/O. Suitable for
Wireless or Wired Monitoring including Covert Surveillance, Baby Monitoring,
Portable or Multi-Point Surveillance Monitoring, Advertising Displays, etc.
Special version with external Antenna input for Long Range up to 10 kilometres
using 2 Watt Transmitter & High Gain Antennas.